Interactive eBook BuilderInteractive eBook Builder
$59 · unlimited access, unlimited eBooksGet it for $59

· Updated · By · 6 min read

Best Font for Workbooks: Sizes, Pairings and KDP Rules

fontsworkbooksdesignlegibilityprint

The best font for a workbook is a simple, readable one at 11 to 12 points for body text, with any decorative typeface kept to titles. KDP's hard rule is only 7 points as a minimum, but that's the floor, not a recommendation: RNIB says regular print is usually 10 or 12 point, and large print 16 to 18.

No font is universally best, and I'd distrust any article that names one. What I can give you is KDP's published rules, some size guidance with the reasoning, and a way to test your own choice in ten minutes.

What does KDP say about fonts?

Choose something simple and easy to read over long passages, make sure it embeds, and make sure you have the licence. KDP's fonts page names Centaur, Garamond, Hightower Text and Palatino Linotype as body-text options, notes that Times New Roman and Arial are popular, and offers Amazon Endure, a font it designed to reduce page count (it isn't available for Japanese, Kanji or Cyrillic). It also says Constantia and Cambria can help reduce page count. More elaborate fonts can work for headers and chapter titles but aren't recommended for body text.

The technical rules matter more than the taste rules:

RuleSource detail
Minimum size7 points
EmbeddingEmbed all fonts in the PDF; some free or non-standard fonts won't embed
LicenceYou are responsible for licensing any font you use
Faux bold and italicA simulated bold or italic can cause a font error and rejection
Line weightLines in forms and tables at least 0.75 pt
Grey fillsAt least a 10% fill on black-and-white interiors

The practical consequence: don't pick a font from a free site because it looks fun in a preview. Create a test file using only that font, export a PDF and check the font list in your PDF reader; if it isn't embedded, use another. The full production steps are in how to format a book for KDP in Word.

What size should each part of a workbook be?

Size by job: body 11-12 pt, instructions 10-11 pt, labels 9-10 pt and headings 16-24 pt. These are my recommendations (opinion), not KDP rules, and they assume a regular, not large-print, audience:

ElementSuggested sizeStyleWhy
Chapter title20-24 ptDecorative or boldVisual anchor
Section heading14-16 ptBold, same family as bodyScannable
Body text11-12 ptSerif, e.g. Garamond or PalatinoLong passages
Exercise instructions10-11 ptItalic or sans-serifDistinct from teaching text
Field labels9-10 ptSans-serifSmall but legible
Writing lines0.25-0.375 in spacing0.75 pt line weightRoom for handwriting

Workbook text gets used differently from book text, with a reader's eyes moving between instructions and blank space, so differentiate instructions from teaching with type style rather than size. And if your readers are older or have low vision, go larger: RNIB describes large print as generally 16 to 18 point and giant print as anything bigger.

How wide should a line of text be?

About 45 to 75 characters, with 66 often cited as ideal. That rule comes from Robert Bringhurst's The Elements of Typographic Style. The risk in workbooks is large pages with small margins. As a rough guide (my estimate, assuming average character width of about half the point size, which varies by font):

TrimMargins (in/out)Text widthFontApprox. characters per line
6 x 90.5 / 0.55.0 in11 ptabout 65
8 x 100.5 / 0.57.0 in11 ptabout 90
8.5 x 110.75 / 0.757.0 in12 ptabout 84
8.5 x 11 in two columns0.75 / 0.75, 0.25 gap3.375 in each11 ptabout 44

The arithmetic is text width in points (inches x 72) divided by half the font size. A single full-width column on 8.5 x 11 runs well past 75 characters, which is why workbooks often use wider margins, two columns or a side panel for instructions. Margin minimums by page count are in how to fix KDP margins.

How many fonts should I use?

Two families at most: one for headings, one for everything else. A well-known guideline (a convention, not a rule) is one serif and one sans-serif, or a single family in several weights. A tidy pairing on KDP's list: Garamond or Palatino Linotype for body, with Arial or a bold weight of the same family for labels. Another is to use one family only, with weights doing the differentiation. Each extra font is also another embedding risk.

When you plan an interactive eBook in Interactive eBook Builder, the same logic carries over: Agent C Polisher handles layout and interactivity in its pass, but you still decide which parts of a page are teaching, instruction and response. Setting those up in a Section Blueprint in the Packs Database before drafting means each element has a type, which makes the type styles easy to assign. For the content structure behind that, see how to make a workbook to sell.

What changes if the workbook is digital?

Readers can often enlarge the text themselves, so the question becomes how your layout behaves when they do. RNIB notes that many eBook readers let people enlarge the typeface, which is a real advantage over print for readers with low vision. If you're building a fillable or interactive version, check the finished file at a larger text size before release; the steps for building one are in how to make an interactive workbook. In Interactive eBook Builder, Agent C Polisher's final QA pass is the place I'd add that check to your routine.

How do I test a font choice?

Set one full page in the font, print it, and read it at arm's length. KDP's own advice is to experiment with sample pages, because seeing a whole page of thousands of characters tells you more than a specimen line. A quick protocol (my suggestion):

  1. Set a page with a heading, two paragraphs, a form and a table.
  2. Print it at actual size; don't judge on screen.
  3. Read it with a pen in hand, as a user would.
  4. Check that bold and italic are real by looking at the PDF's font list.
  5. Compare two fonts side by side and pick the one you skim fastest.

Poetry has its own typography needs, such as line breaks and generous white space, which the poetry self-publishing guide covers.

Before you hit send

The takeaway: pick a simple font that embeds, size it by job rather than by habit, and judge it on a printed page, not a screen.

FAQ

What is the best font for a workbook?

A simple, readable font such as Garamond, Palatino Linotype, Constantia or Arial for body and instructions, at 11-12 pt, with a decorative font reserved for titles. No single font is "best"; test a full page.

What font size should a workbook use?

KDP's minimum is 7 points, but for comfortable reading use 11-12 pt for body text and 10 pt or larger for labels. Large print is generally 16-18 pt, according to RNIB.

Can I use Canva fonts in a KDP workbook?

Only if the font embeds in your exported PDF and you have the licence to use it in a book. KDP says some fonts won't embed because of technical or legal restrictions, so export a test PDF first.

Why does KDP reject some fonts?

KDP says fonts that cause production problems are rejected at ingestion. Faux bold or italics (simulated rather than real font files) are a common cause.

Ship niche eBooks with agents already built.

Get the Interactive eBook Builder for $59