A KDP paperback cover is a single PDF containing back cover, spine and front cover, and its size is calculated as bleed + back + spine + front + bleed wide and trim height + 0.25 inch tall. The spine is the only part that depends on your page count: multiply pages by 0.002252 inch for white paper. A 6 x 9 inch book with 200 white pages needs a 12.7 x 9.25 inch cover file.
The numbers below come from KDP's cover help page as I read it in November 2026. KDP also offers a cover calculator and template generator; use it to confirm your result before uploading.
What is the full-cover width and height formula?
Width = bleed + back width + spine + front width + bleed; height = bleed + trim height + bleed. KDP's bleed is 0.125 inch (3.2 mm) on the top, bottom and outside edges. Because the back and front cover are each one trim-width wide, the width simplifies to 0.25 + 2 x trim width + spine width.
The spine width factor depends on paper:
| Paper | Spine per page |
|---|---|
| Black and white, white paper | 0.002252 in (0.0572 mm) |
| Black and white, cream paper | 0.0025 in (0.0635 mm) |
| Standard color | 0.002252 in |
| Premium color | 0.002347 in (0.0596 mm) |
Here are worked results for two trims, white paper, using those formulas (my arithmetic):
| Pages | Spine (white) | 6 x 9 cover (W x H) | 8.5 x 11 cover (W x H) |
|---|---|---|---|
| 100 | 0.225 in | 12.475 x 9.25 | 17.475 x 11.25 |
| 150 | 0.338 in | 12.588 x 9.25 | 17.588 x 11.25 |
| 200 | 0.450 in | 12.700 x 9.25 | 17.700 x 11.25 |
| 300 | 0.676 in | 12.926 x 9.25 | 17.926 x 11.25 |
| 400 | 0.901 in | 13.151 x 9.25 | 18.151 x 11.25 |
Cream paper is thicker per page, so at 200 pages the spine is 0.5 inch, not 0.45, and a 6 x 9 cover is 12.75 inches wide. Choosing the wrong paper in the calculator is the commonest way to get a spine that doesn't line up.
How many pixels does my cover need?
At least 300 DPI means multiplying each dimension in inches by 300. KDP asks for images at a minimum of 300 DPI, CMYK, flattened to one layer and sized at 100%. For the 200-page white-paper 6 x 9 example: 12.7 x 300 = 3,810 pixels wide and 9.25 x 300 = 2,775 pixels tall. For the 8.5 x 11 version: 17.7 x 300 = 5,310 by 11.25 x 300 = 3,375 pixels. If you export from a design tool at a lower pixel count, KDP may flag low resolution or print it soft; the fix is to rebuild the file at the right size rather than upscale. If your cover is for a Kindle eBook instead, the sizes are different; see ebook cover size for Amazon KDP.
Can you walk me through one calculation?
Yes: a 6 x 9 inch, 180-page book on cream paper has a 12.7 x 9.25 inch cover. Here are the steps:
- Spine = 180 x 0.0025 = 0.45 in.
- Width = 0.125 + 6 + 0.45 + 6 + 0.125 = 12.7 in.
- Height = 0.125 + 9 + 0.125 = 9.25 in.
- Pixels at 300 DPI = 3,810 x 2,775.
Run the same book as a premium color interior with 150 pages and the spine becomes 150 x 0.002347 = 0.352 in, so the cover is 12.602 inches wide. Same trim, different paper, different cover: that is why you shouldn't reuse a template from an earlier book without recalculating. Both examples are my arithmetic from KDP's formulas, so verify with KDP's calculator before you upload.
Can I put text on the spine?
Only if the book has at least 79 pages, and with at least 0.0625 inch of space on each side of the text. KDP's help page says a cover with spine text on a shorter book will be rejected and need adjustment. (The same page also says "more than 79 pages" in one place; if your book is right at the limit, add a page or leave the spine blank to be safe.) KDP also notes that bound books vary slightly, so allow 0.0625 inch of variance either side of the fold lines, and that spine shifts up to 3.2 mm are within acceptable print variance, which is why it doesn't recommend hard-edged colour blocks on the spine.
Other placement rules from the same page:
| Element | Rule |
|---|---|
| Front and back text | At least 0.125 in inside the trim lines; none may extend into the spine |
| Backgrounds | Extend 0.125 in past the trim on all outside edges |
| Borders | Not recommended; if used, at least 0.25 in inside the trim line |
| Barcode | Upload your own, or KDP places one on the back cover automatically |
| Crop marks, colour bars, template text | Remove before saving the PDF |
| Book details | Title, author and edition must match the details you entered in title setup |
Margins inside the book are a separate rule set; how to fix KDP margins covers the interior.
When should I make the cover?
After the page count is final, because every added page changes the spine width. The practical order I'd suggest (my opinion) is to finish and proof the interior, record the final page count, run the formula, then build the cover. A last-minute extra page at 0.002252 inch is tiny, but it moves the fold lines relative to your artwork, which matters for a design with fixed spine text.
In Interactive eBook Builder, Agent C Polisher's final QA pass is a natural moment to freeze the content before you measure a spine. If you're preparing a workbook or journal to sell as a book, the layout questions are in how to make a journal to sell on Amazon with Canva, and the page count itself is discussed in how many pages a book should be.
What does a cover pre-flight checklist look like?
One page with measurements, file settings and a visual check. You can turn the list into a reusable gate in the Packs Database of Interactive eBook Builder, where QA/Gate items hold checks like these, then tick each one before upload:
| Check | Pass condition |
|---|---|
| Trim and paper | Match your interior file and the KDP trim size chart |
| Spine width | Pages x factor for your paper |
| Bleed | 0.125 in on top, bottom and outside |
| Spine text | 79 pages or more |
| Images | 300 DPI, CMYK, flattened |
| File | Single PDF; no crop marks |
Before you hit send
- Is the page count final?
- Did you use the spine factor for your exact paper?
- Does the PDF measure exactly what the formula gives?
- Is spine text inside the safe area, or removed under 79 pages?
- Did you view the cover and compare it to the KDP previewer?
The takeaway: the spine is pages x factor, the cover is 0.25 + 2 x trim width + spine wide, and the page count has to be final first.